Veneered MDF cut to size
Real wood veneer on an MDF core, cut to your sizes. Veneer has a direction and a match, so this is the material where locking the grain in the optimiser matters most: a part turned to save a sheet is a part with the grain running the wrong way.
Open the free cut list optimiserHow many boards your parts actually need, with the layout of every cut.
- Oak, ash and walnut veneer, crown cut and quarter cut.
- Sheets 2440 × 1220 mm and 3050 × 1220 mm for tall doors without a join.
- Veneer edging or matching ABS on the edges you name.
- Lock the grain in the optimiser — on veneer it is not optional.
Thicknesses we cut
6 mm12 mm18 mm22 mm25 mm
Thicker than 25 mm, or a size not listed here? Ask — most of it we can get.
Boards we stock in this range
Oak Veneered MDF 1220x2440 8' x 4' Crown Cut
2440 × 1220 mm · grain
Oak Veneered MDF 1220x3050 10'x4' Crown Cut
3050 × 1220 mm · grain
MR Oak Veneered MDF 1220x2440 8' x 4' Crown Cut Moisture Resistant
2440 × 1220 mm · grain
Oak Veneered MDF - 8' x 4' Quarter Cut
2440 × 1220 mm · grain
Walnut Veneered MDF 8' x 4' Crown Cut
2440 × 1220 mm · grain
Oak Veneered Black Core MDF 1220x2440 8'x4'
2440 × 1220 mm
Maple Veneered MDF 1220x2440 8' x 4' Crown Cut
2440 × 1220 mm · grain
Ash Veneered MDF 1220x2440 8'x4' Crown Cut
2440 × 1220 mm · grain
Pro GRADE Walnut Veneered A+/B+ MDF 8' x 4' Crown Cut
2440 × 1220 mm · grain
Sheet sizes come from our own catalogue, so what you see is what the saw
will cut from. Put your parts through the optimiser and it uses these exact sizes.
Worked example: Three veneered doors, grain locked
| Part | Length | Width | Qty |
|---|---|---|---|
| door | 2040 | 600 | 3 |
| panel | 900 | 600 | 2 |
On a 2440 × 1220 mm board that is 2 board(s), 79.8% used. Divide the areas instead and you would order fewer, and be short.
What people cut it for
- Doors and drawer fronts in real wood
- Wall panelling and reception desks
- Furniture where the grain has to run one way
- Matching a veneer already in the room
Standard board for this material: 2440 × 1220 mm.
Questions
Will the veneer match across parts?
Parts cut from one board carry on across it. If a run has to match, tell us and we will keep it to one board where the sizes allow.
Can it be lacquered?
We supply it raw. Finishing is done by you or your sprayer.
Why does the optimiser say more boards when I lock the grain?
Because it can no longer turn parts to fill a gap. That is the honest number for veneer — the alternative is parts with the grain running the wrong way.
Ordering
We cut, edge and deliver in the United Kingdom. Send your list — or
the optimiser's result — to uniboards.co.uk and we will price it.